The B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K # BWRVK3370 you were looking at weighs in right at 250lbs.
You will want to have a buddy help you when installing the hitch in your truck as it is pretty heavy.
I included a video of the # BWRVK3370 being installed in a 2019 Ford F-350 for you to take a look at. view full answer...
You are safe to tow up to the full rated capacity of your 2010 Subaru Outback 2.5L. The online owners manual states a maximum loaded trailer weight of 2,700 lbs with a maximum tongue weight of 200 lbs. The manual states this is 8% of the maximum trailer load with is definitely on the low end. Most trailers will have 10-15% of the weight as tongue weight so you will need to be cautious in how you load the trailer to make sure you are within both total weight and tongue weight capacities... view full answer...
The Reese Elite Series Fifth Wheel Trailer Hitch # RP30144 basically breaks down to three pieces: The head # 58292 which is about 40 pounds, the head support # 58293 which is about 50 pounds, and the sliding base which is about 100 pounds.
Realistically, you will only remove the head to move the hitch in and out of your truck bed so the base and head support will be attached weighing about 150 pounds. view full answer...
The tallest gooseneck hitch ball we have that fits the OEM gooseneck hitch of your 2019 Ford F-350 is the B and W # BWNGXA2062 which is 5-3/4 inches above the bed total. view full answer...
The Demco Hijacker UMS Double Pivot 5th Wheel Hitch # DM8550033 base measurements you asked about are:
X = 3-3/4"
Y = 1-3/8"
These are symmetrical so the cutout would be the same for all of the pucks on your 2020 Ford F-350 Super Duty. I reached out to Demco and my contact said that you actually shouldn't have to cut out your in-bed liner. You will see some wear on it from the 5th wheel hitch but it shouldn't crack it or anything. view full answer...
The Underbed Rail and Installation Kit for Demco Hijacker UMS 5th Wheel and Gooseneck Trailer Hitches item # DM8551009 does fit your 2022 Ford F-350 Super Duty. These are the under bed rails you will need for the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Underbed - 18,000 lbs item # DM8550022 to work in your F-350 as well. This hitch slides automatically as you drive to give you 14" of additional clearance for tight turns. You will not have to get out of... view full answer...
The Curt Trailer Hitch Receiver # C15410 is 37" wide and the bolt hole slots are 34-1/4" on center from drivers side frame rail to passenger side frame rail. view full answer...
The Lomax Hard Tonneau Cover item # AB1010049 is three equally sized pieces of aluminum that are over two feet each. When it is all the way folded up you will not have enough clearance with your 2022 Ford F-350 Super Duty 6-3/4 Foot Bed to turn with your 5th wheel. The last panel will be too close to the hitch plus the other sections will be stacked on top. The folded panels can be easily removed without tools for full bed access though. I have attached a review video and linked the instructions... view full answer...
The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches # UWS65XR is 20-1/2" x 48 1-/2".
As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically that act as a "floor". view full answer...
The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD # 325-GH-8040 that you referenced was not designed to give additional vertical height over a standard pin box so it would not necessarily be the solution you need. Instead you might see if you can lower your current pin box in the mounting brackets to give you additional height.
Or another option would be to go with a taller fifth wheel hitch like the B and W Companion part # BWRVK3300 which can be used at a... view full answer...
The B&W Companion OEM model, part # BWRVK3300, which you referenceed, has a 20K capacity so you will not want to go over the 20K capacity of the hitch. If your trailer weighs 23,000 lbs you will be over the weight limit.
As long as you have the long bed, and the fifth wheel prep package you can use the Reese M5 Series 5th Wheel Trailer Hitch # RP30922. This hitch has a capacity of 27,000 lbs and would have plenty of capacity for your setup.
You should have 4 slightly raised pucks in... view full answer...
The Demco Hijacker Autoslide 5th Wheel Hitch # DM8550024 referenced in your question, which is confirmed to fit your 2015 Ford F-350 with the factory rail kit, has a total weight of 289 pounds. The hitch head can be removed, which has a weight of 65 pounds. You will need two people to remove or install the hitch.
The Demco Hijacker has 3 possible hitch height settings, which are measured from truck bed floor to the top of the hitch head. It can be set at 15-1/2 inches, 16-3/4 inches or... view full answer...
It will if your 2023 Ford F-350 has an 8' bed. The BAKFlip F1 Hard Tonneau Cover item # BAK72331 you were looking at is confirmed to fit a 2023 Ford F-350 with an 8' bed. If you truck has the 6-3/4' bed you will need item # BAK72330.
The BaKFlip F1 tonneau cover is made of 5/8" thick fiberglass-reinforced polymer panels that are dent resist and stand up to harsh sunlight. They are compatible with stake-pocket-mounted accessories like ladder racks.
The best part about the BAKFlip F1's... view full answer...
For a 48" hitch extension that fits a 3" receiver you're going to want the TorkLift Cannon Hitch Extension item # TLE1648. This hitch extender is specially designed to work with Ford's 3" factory trailer hitch. This is the only option for that length of an extension. It is limited to a 3,000 lbs capacity. There are two shorter options with a slightly higher capacity. I have listed them below.
36" Long - TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch item # TLE1636
42"... view full answer...